Leadermac Speedmac Moulder Series with 4-11 Heads and up to 200, 260, 300 or 400 FPM

Contact us for price




Leadermac Speedmac Moulder Series - Configured with 4-11 Heads and 200, 260, 300 or 400 FPM

The Speedmac Moulder Series, manufactured by Leadermac, features 9", 10.2", 12", 13", 15.75 working widths; and 1/4", 6", 8" or thickness specifications.

Technical Specifications:

  • 1 to 11 Heads
  • Feed Speeds to 120 or 150 FPM
  • Full Sound & Safety Enclosure with internal lighting system
  • One-piece, cast iron machine frame is specially heat treated for standard configurations
  • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
  • Feed system is Chainless Full HD Cardan Shafft Drive with very heavy gearboxes and universals
  • Faster Feed Speeds of up to 120fpm(40m/min) are standard and to 150fpm(45m/min)
  • Pneumatic pressure of the Top Feed Rolls can be easily set to provide the best feed rool pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls
  • Pneumatic Pressure – easily adjusted to Side head Holdover Rolls as well as the Top Head Chipbreaker(s)
  • Precision Spindle Assemblies each including 4 Super Precision Bearings for highest tolerances and Outboard Hydro-Loc Bearing Assemblies on wider machines
  • Spindles Speeds are std. 6,000rpm and 7,200rpm/8,000rpm are optional
  • Each spindle is driven by an individual motor for powerful machining and easy control
  • REC Setworks &ndash; Programmable controller provides convenient thickness &amp; width of cut settings. More Powered Top &amp; Full Width Bottom Rolls then most of our competition. (See Optional SmartSet Controls listed below and in separate section)</span>
  • Hard-Chrome Plating to all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide for maximum wear resistance
  • Digital Counters on all heads Axial and Radial as well as counters on Chip Breakers &amp; Pressure Plate(s)
  • Automatic Table Lube System included
  • Central Grease Lubrication System &ndash; lubrication points located from front of machine
  • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 &ndash; can convert to single phase and other voltages optional

Available Options:

  • Special Machine &amp; Head Layout &amp; opposite Handed Configurations available on Request:
  • SmartSet 100 &ndash; Operator Touch Screen Controls to load desired sizes and download to the machine which is equipped with Dual Electronic Digitial Readouts Top Desired position and bottom actual set position
  • SmartSet 300 &amp; 400 &ndash;
  • Touch Screen Moulder Control System &ndash; Maintain all history files, downloads info from the grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc.
  • H.D. 2/1 &amp; 2/2 Feedworks for Rough Material or Tough application Hi-Speed Feeding
  • Quick Axial Set of 4&Prime; (100mm) adjustment to the side heads &ndash; so that you can stack heads on top of each other for quick pattern changes
  • Hydro-Loc Outboards for horizontal spindle support on high speed &amp; wider machines
  • Tilting Top Beam, Chipbreaks &amp;/or Pressure Plate
  • Angling Side Head Spindle(s)
  • Grooved Beds for very Short Stock Feeding
  • Universal Head or Rip Attachment is optional
  • Stand Alone Operators Console &amp;/or remote Hand held Pendant control
  • CE Specifications and 380 or 415/3/50 electrics also available

Standard Specifications:

Working Width 0.78″-9.1″, 10.2″, 12″, 13″ or 15.75″
(20-230mm, 160mm, 300mm, 330mm or 400mm)
Working Thickness 1/4″-6″, 8″ or 10″
(10-150mm, 200mm or 250mm)
Number of spindles 1-11
Motor capacity per spindle 7.5HP to 40HP
Feed motor (VFD Controlled) 7.5HP to 20HP
Spindle Speed 6000, 7200 or 8000 RPM
Spindle diameter 1-13/16″, 2 1/8″, 40mm or 50mm
Feed speed, infinitely variable 19.5-120 FPM(6-36m/min), 150FPM(45m.min)
or 200FPM(60m.min) are optional
Length of the infeed table 32″(0.8m), 55″(14.m), 78.7″(2m); 98″(2.5m) or 120″(3m)

Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

Phone 678.642.9722 

Email sales@firstchoiceind.net

You may also like

Recently viewed machines