Leadermac Smartmac Moulder Series with 1-5 Heads and up to 90 FPM

Contact us for price




Leadermac Smartmac Moulder Series

Configured with 1-5 Heads and up to 90 FPM
7", 8', to 9" working width

The Smartmac Moulder Series, manufactured by Leadermac, is available in a wide variety of configurations, and 1 Shot Table Lube System.


  • 1 to 5 Head Moulder
  • 7″ (180mm) or 9″ (230mm) Width
  • Full Sound & Safety Enclosure includes lighting fixtures
  • 1 piece, cast iron heavy machine frame is specially heat treated for standard configurations
  • Motorized vertical adjustment of feed beam
  • More full width Top & Bottom Driven Rolls them most competitors
  • Feed System is Chainless Heavy Duty Cardan Shaft with very heavy gearboxes and universals
  • Fast variable feed speeds of up to 80 fpm (25mpm) are standard – higher speeds optional
  • Precision Spindle Assemblies each include 4 Precision Bearings for high tolerances
  • Spindles Speeds are std. 6000 rpm and 7200 rpm are optional
  • Each Horizontal spindle is driven by an individual motor & Side Heads share a common motor
  • Pneumatic pressure of feed rollers can be easily set to assist smooth feeding. Separate contrls for top Infeed, Midfeed & Outfeed Rolls
  • Hard-Chrome Plating throught all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide
  • Dual Digital Counters On Near Side Head & Top Head Radial Set & Mechanical Digital Readouts for all heads Axial and Radial, the pressure plates & Top Head Chip Breaker
  • 1 Shot Table Lube System
  • Central lubrication system – lubrication points located from front of machine
  • Complete set of cutter heads
  • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/415/3/50 as desired- can convert to single phase optional.

Technical Specifications:

Working width 0.78″ – 7″, 8″ or 9.1″
Working thickness 10-125mm(.39″ – 5″); 0.25″ optional
Number of spindles 1 to 5
Motor capacity per spindle 5 HP – 15 HP
Spindle speed 6000 RPM (7200rpm optional)
Spindle diameter 1-13/15″; 40mm (1.6″), 1-1/2″ or 50mm
Feed speed, infinitely variable 6-24m/min (19.5-78 FPM)
Adj. range: infeed table
and edge-jointing fence
10mm (0.4″)
Length of the straightening table 78″ (2m), 98″ (2m) or 120″ (2.5m)

For complete info, contact authorized and factory-trained Leadermac Machinery Dealer and our moulder specialist with 30+ years moulder service and sales experience.. . .

First Choice Industrial
Phone: 678-642-9722

Email: sales@firstchoiceind.net

You may also like

Recently viewed machines