Leadermac Compact Moulder LMC 623C with 6 Heads and up to 100 FPM

Leadermac Model LMC 623C Compact 9" 6 Head Moulder

Technical Specifications:

• Width - Material: .6" to 9" (12" & 13" optional)
  Thickness - Material: .4" to 6" 
  

 Note - to .25" thick and/or to 8" or 10" thick optional

• Min length of material: 8" (200mm) (Butt fed)
• Axial adjust. side heads:1.6 (40 mm)
• Axial adjust. top/btm heads: .8" (20mm)
• Net weight:11,650lbs.

Main Frame, Machine Bed and Enclosure Specifications:

• 1 Piece - Cast Iron Main Frame.  Specially heat treated for maximum stability and minimum vibration
• 78 inch (2 meter) long Adjustable Straightening Infeed Table and Fence (each adjustable .4 inch) - other table lengths optional
• Tables, Chipbreakers, Pressure Plates and Fences are Hard Chromed with approx. .012" chrome thickness (except 1st bottom receiving plate which is alloy steel specially hardened for best wear ability)
• Lift up sound and safety Enclosure including safety interlocks and good lighting inside the enclosure

Drive Specifications:

• Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roll station
• Powered rise and fall to extra heavy feed support beam by 1 hp/.75 kw motor. 
• Upper support Beam is supported at both the Infeed and Outfeed ends on 2 large columns for best, most rigid upper beam support.
• All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme points.
• 9 Top Driven Feed Roll assemblies (each equipped with multiple 2" wide rolls that can be quickly spaced/positioned or removed as desired)
• 3  Full Width Driven Bed Rolls
• 2 Piece Full width Bottom Driven Infeed Roll
• Top/Bottom Powered Outfeed Rolls, with bottom full width and plain
• All Top Rolls are Pneumatically Tensioned. There are 3 different pressurized groups to the Top Rolls. Infeed, Midfeed & Outfeed Top Rolls. Each group has a pressure gauge and regulator for varying pressure setting. This really helps for the feeding of different materials with different conditions, smoothly and efficiently.
• Top infeed rolls before first bottom head with pneumatic rise and fall by switch
• Centrally located Pneumatic Pressure Gauges & Controls for Top Rolls, Chip Breakers and Roll holdover Assembly opposite rear side head on Exterior Column
• All Infeed Top Rolls are Hardened, Serrated and Chromed to resist wear and prevent chips and shavings from sticking to them
• Top feed rolls after top head are Polyurethane
• Intermediate Top Driven Feed Roll Station in front of rear side head with pneumatic loading for feeding minimum length work-pieces.  It is easily flipped up for rear side head removal.
• Inch forward and reverse to feed with duplicate control at top head position for fast easy setting
• Feed roll diameter   5.5" / 140mm
• 5 HP Variable Speed Drive with VFD 20-100 fpm and Electronic Digital Speed Readout

For additional information and shipping quotes...

Contact Stan, our moulder specialist with 30+ years moulder service and sales experience and a authorized and factory-trained Leadermac Machinery Dealer . .

First Choice Industrial

Phone: 678-642-9722
Email: sales@firstchoiceind.net