678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Moulders

First Choice Industrial offers a large selection of automatic throughfeed moulders from SCM Group, including the SCM Profiset 40 Moulder, SCM Profiset 60 Moulder, SCM Superset NT Moulder, SCM Topset XL Moulder,and SCM Topset Master Moulder.  And in additon to our wide selection of new moulders, we offer a large variety of used moulders in our national data base of used woodworking machinery.

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Proficet 40 Moulder - Photo Detail

    SCM Profiset 40 Moulder

    Contact Us For Price

    SCM Profiset 40 Moulder

    The Profiset 40 Automatic Planer and Throughfeed Moulder, from SCM Group, is a compact, safe, and cost effective way to manufacture straight planed and profiled timber in one pass. 

    Featuring 4 spindles with 10 mm profiling capacity--via vertical spindles—the Profiset 40 is also equipped with a single button for a sequential motor start.

    Available either as a standard machine or the EP version with a programmer for automatic "Dial a Size" width and thickness settings.

    Learn More
  2. Leadermac Slicermac Moulder Series

    Leadermac 4 Sided Slicermac Moulder Series - Configured with 1-11 Heads and Vertical Rip Saw

    Contact Us For Price

    Leadermac Slicermac - 4 Sided Moulder Series Configured with 1-11 Heads

    High Capacity  -  High Accuracy  -  Easy Operation

    This 4 sided moulder. manufactured by Leademac, is equipped with two slicing units, one for scoring saw and one for main saw. Additionally, this high capacity moulder features heavy duty spindles and premium housing bearings for superior finish quality.

    Technical Specifications:

    • 9″, 10.2″, 12″, 13″ or 15″ Width; 6″, 8″ or 10″ Thickness Capacity
    • Feed Speeds to 200FPM(60mpm) or 260FPM(80mpm) or 300FPM(90mpm) or 400FPM(120mpm)
    • Full Sound & Safety Enclosure
    • One-piece, Cast Iron Machine Frame is heat treated for ma. stability & rigidity for std. configurations
    • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
    • Feed System is Chainless Full HD Cardan Shaft with very heavy gearboxes and universals
    • H.D. Infeed System with 8″ (200mm) Dia. Top Rolls
    • Sectional Pneumatic Pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressures
    • Pneumatic Pressure to Side head Holdover Rolls as well as the Top Head Chipbreaker(s) + Side head Chipbreaker(s)
    • Super Precision Spindle Assemblies ea. incl. multiple Super-Precision + outboard Bearings for highest available runout tolerances – hence better finish
    • Spindles Speeds are Std. 6,000 RPM and 7,200/8,000RPM are optional
    • Hydro-Loc Outboards for Horizontal Spindle Support
    • Each spindle is belt driven by an individual HD Motor
    • REC Setworks – Programmable controller provides convenient thickness & width of cut settings. More Powered Top & full Width Bottom Rolls then most of our competition. (See Optional SmarSet Controls listed below and (See Optional SmarSet Controls listed below and in Separate Section)
    • More Powered Top & Full Width Bottom Rolls then most of our competition
    • Exclusive, separate adjustment of the Vertical(Side Head) spindles and the support tables allow the support tables to be positioned extremely close to the side cutterheads to provide added cutting stability
    • Extra Heavy Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates & Main Guide for max. wear resistance
    • Counters for position all Cutterhead axis, Chip Breakers and Pressure Plates
    • Automatic Pneumatic HD Large Tank Capacity Table Lube System included
    • Central Easy Access Grease Lubrication systems
    • Stand alone Operators Console
    • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/3/50 or415/3/50 if required

    Special machine & Head Layout & opposite Handed Configurations available on Request

    • Feed Speeds to 300FPM(90m/min)  or 400FPM(120m/min)
    • SmartSet 100 – Operator Touch Screen Controls with 250Set Memory to load desired sizes and download to the machine which is equipped with Dual Electronic Digital Readouts – Top Desired position and bottom actual set position also including Quick Open Reset.  
    • SmartSet-300 Touch Screen Moulder Control System – 1,000Set Memory – Maintain all history files, downloads info to the machine and control, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. also including Quick Open Reset.   
    • Precision Auto Straight &/or Profile Jointers
    • Tilting Chip Breakers, Pressure Plates and/or Feed Beam
    • Angling Side Head Spindle(s)
    • Grooved Beds for very short stock Feeding
    • Universal Head or Rip Attachment is optional
    • Remote Hand held Pendant control

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  3. Leadermac Gluemac Moulder Series

    Leadermac Gluemac Moulder Series with 3-7 Heads and Up to 90 FPM

    Contact Us For Price

    Leadermac Gluemac Moulder Series

    The Gluemac Moulder Series, manufactured by Leadermac, features a pre-gluing milling device to ensure perfect gripping of glue surfaces.

    Technical Specifications:

    • Side Head have horizontal spindles for fly type cutterheads (for glue edge preparation
    • 4 to 6 Heads – 9″, 10.2″, 12″, & 13″ Widths
    • One piece machine frame specially heat treated & stress relieved
    • 1-1/2″, 40mm, 1-13/16″ or 50mm diameter spindles standard
    • SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle)
    • 6000, 7200, or 8000 RPM optional
    • Each spindle is driven by individual motors
    • Tables/Fences and Chipbreakers are hard chrome plated
    • Full Cardan Shaft drive with feed speeds up to 82 FPM
    • Top rolls variable pneumatic tensioned
    • Full width bottom driven bedrolls
    • Pneumatic tension top chipbreakers & roll holdovers – Optional
    • Easy head adjustment by mechanical digital readouts
    • Dual Digital Readout available for radial setting (NS & Tops)
    • REC-705B Quik-TrueSet Setworks optional
    • Universal head or rip section optional
    • Safety enclosure serves as chip guard and greatly reduces noise

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net

    Learn More
  4. Proficet 60 Moulder - Product Photo

    SCM Profiset 60 Moulder

    Contact Us For Price

    SCM Profiset 60 Moulder

    The Profiset 60 Automatic Planer and Throughfeed Moulder, from SCM Group, can be configured with up to 6 spindles, and it is available in four compositions with the (option) to preset the profiling on the top horizontal spindle.

    Also, to ensure powerful and efficient linear feeding, the Profiset 60 is equipped with a feed drive system, carding joints, and pneumatic pressure feed rollers. Learn More

  5. SCM Superset NT Moulder

    SCM Superset NT Moulder

    Contact Us For Price

    SCM Superset SCM Moulder

    The Superset NT automatic throughfeed moulder, from SCM Group, is an ideal manufacturing solution for companies working various shifts to produce prismatic profiles, frames, profiles and linear parts for windows, doors, furniture, garden furniture, boat furniture etc.  

    And when small batches are required for custom work, the Superset NT is a practical solution for manufacturers that require flexibility and productivity .

    Featuring . . .

    • Simple profile changes with the patented “set up” system that  requires just one control.
    • Automatic machine setup with "Mobile 10” electronic control w/self-learning function.
    • Rapid tool change with the HSK attachment.


    Learn More
  6. Leadermac Compact Moulder Series

    Leadermac Compact Moulder Series - Configured with 1-9 Heads and up to 100FPM

    Contact Us For Price

    Leadermac Compact Moulder Series

    Competitively Priced - Custom Configurations and Adaptable Features

    Range of the Compact Series Configurations:

    Working Widths - 9", 10.2", 12", 13"
    # Heads -1-9 Heads
    Type - Unjointed

    Feed Speed - up to 100FPM

    Pricing varies based on specific customized configurations and features - Call 678-642-9722 today,  for complete information from Stan, our moulder service professional, with 30+ years of experience assisting our customers in selecting the right moulder for a variety of manufacturing applications and production needs.

    Technical Specifications:

    • Compact Design, Packed with Features
    • 1 to 9 Heads
    • 9", 10.2", 12" & 13" Widths
    • 6", 8" to 10" Thickness
    • One piece cast iron or steel machine frame, specially heat treated & stress relieved
    • 1-1/2", 40mm, 1-13/16 or 50mm Diameter Spindles standard
    • 6000 or 7200 RPM optional
    • Each spindle is driven by individual motors
    • Tables/Fences, Chipbreakers and Pressure Plates are hard chrome plated
    • Full Cardan Shaft drive with feed speeds up to 100 FPM (VFD Driven)
    • More Top & Bottom Driven Rolls them most competitive moulders
    • Top rolls variable pneumatic tensioned
    • Full width bottom driven bedrolls
    • Pneumatic tension top chipbreakers & roll holdovers
    • Easy head adjustment by mechanical digital readouts
    • Dual Digital Readout available for radial setting (NS & Tops)
    • Standard Digital Readouts on all other axis
    • REC-705B & DP Quik-TrueSet Setworks optional on any axis
    • Universal head or rip section optional
    • SmartSet Touch Screen , Quick-Set & Memory Control System  (optional)
    • Safety enclosure serves as chip guard and greatly reduces noise.

    For additional information and shipping quotes...

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Email sales@firstchoiceind.net
    Phone 678.642.9722
    Learn More

  7. Leadermac Smartmac Moulder Series

    Leadermac Smartmac Moulder Series - Configured with 1-5 Heads and up to 90 FPM

    Contact Us For Price

    Leadermac Smartmac Moulder Series

    Configured with 1-5 Heads and up to 90 FPM
    7", 8', to 9" working width

    The Smartmac Moulder Series, manufactured by Leadermac, is available in a wide variety of configurations, and 1 Shot Table Lube System.

    Features:

    • 1 to 5 Head Moulder
    • 7″ (180mm) or 9″ (230mm) Width
    • Full Sound & Safety Enclosure includes lighting fixtures
    • 1 piece, cast iron heavy machine frame is specially heat treated for standard configurations
    • Motorized vertical adjustment of feed beam
    • More full width Top & Bottom Driven Rolls them most competitors
    • Feed System is Chainless Heavy Duty Cardan Shaft with very heavy gearboxes and universals
    • Fast variable feed speeds of up to 80 fpm (25mpm) are standard – higher speeds optional
    • Precision Spindle Assemblies each include 4 Precision Bearings for high tolerances
    • Spindles Speeds are std. 6000 rpm and 7200 rpm are optional
    • Each Horizontal spindle is driven by an individual motor & Side Heads share a common motor
    • Pneumatic pressure of feed rollers can be easily set to assist smooth feeding. Separate contrls for top Infeed, Midfeed & Outfeed Rolls
    • Hard-Chrome Plating throught all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide
    • Dual Digital Counters On Near Side Head & Top Head Radial Set & Mechanical Digital Readouts for all heads Axial and Radial, the pressure plates & Top Head Chip Breaker
    • 1 Shot Table Lube System
    • Central lubrication system – lubrication points located from front of machine
    • Complete set of cutter heads
    • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/415/3/50 as desired- can convert to single phase optional.

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net
    Learn More

  8. Leadermac Smartmac Moulder Series

    Leadermac Compact 6 Head Moulder - Model LMC 623C

    Contact Us For Price

    Leadermac Model LMC 623C Compact 9" 6 Head Moulder

    Main Frame, Machine Bed and Enclosure Specifications:

    • 1 Piece - Cast Iron Main Frame.  Specially heat treated for maximum stability and minimum vibration
    • 78 inch (2 meter) long Adjustable Straightening Infeed Table and Fence (each adjustable .4 inch) - other table lengths optional
    • Tables, Chipbreakers, Pressure Plates and Fences are Hard Chromed with approx. .012" chrome thickness (except 1st bottom receiving plate which is alloy steel specially hardened for best wear ability)
    • Lift up sound and safety Enclosure including safety interlocks and good lighting inside the enclosure

    Drive Specifications:

    • Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roll station
    • Powered rise and fall to extra heavy feed support beam by 1 hp/.75 kw motor. 
    • Upper support Beam is supported at both the Infeed and Outfeed ends on 2 large columns for best, most rigid upper beam support.
    • All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme points.
    • 9 Top Driven Feed Roll assemblies (each equipped with multiple 2" wide rolls that can be quickly spaced/positioned or removed as desired)
    • 3  Full Width Driven Bed Rolls
    • 2 Piece Full width Bottom Driven Infeed Roll
    • Top/Bottom Powered Outfeed Rolls, with bottom full width and plain
    • All Top Rolls are Pneumatically Tensioned. There are 3 different pressurized groups to the Top Rolls. Infeed, Midfeed & Outfeed Top Rolls. Each group has a pressure gauge and regulator for varying pressure setting. This really helps for the feeding of different materials with different conditions, smoothly and efficiently.
    • Top infeed rolls before first bottom head with pneumatic rise and fall by switch
    • Centrally located Pneumatic Pressure Gauges & Controls for Top Rolls, Chip Breakers and Roll holdover Assembly opposite rear side head on Exterior Column
    • All Infeed Top Rolls are Hardened, Serrated and Chromed to resist wear and prevent chips and shavings from sticking to them
    • Top feed rolls after top head are Polyurethane
    • Intermediate Top Driven Feed Roll Station in front of rear side head with pneumatic loading for feeding minimum length work-pieces.  It is easily flipped up for rear side head removal.
    • Inch forward and reverse to feed with duplicate control at top head position for fast easy setting
    • Feed roll diameter   5.5" / 140mm
    • 5 HP Variable Speed Drive with VFD 20-100 fpm and Electronic Digital Speed Readout

    For additional information and shipping quotes...

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Email sales@firstchoiceind.net
    Phone 678.642.9722
    Learn More

  9.  Leadermac Platinum Moulder Series - Configured with 1-9 Heads and up to 120FPM

    Leadermac Platinum Moulder Series - Configured with 1-9 Heads and up to 120FPM

    Contact Us For Price

    Leadermac Platinum Moulder Series

    Competitively Priced - Custom Configurations and Adaptable Features

    Range of the Compact Series Configurations:

    Working Widths - 9", 10.2", 12", 13"
    # Heads -1-9 Heads
    Type - Unjointed

    Feed Speed - up to 120FPM

    Technical Specifications:

    • 9", 10.2" 12" OR 13" Width; 6", 8" or 10" Thickness Capacity
    • 1 to 9 Heads
    • Feed Speeds to 100FPM(30m/min)
    • Full Sound & Safety Enclosure
    • One-piece, Cast Iron Machine Frame
    • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns(at each end) and includes Motorized vertical adjustment of feed beam
    • Feed System is Full HD Cardan Shaft with very heavy gearboxes adn universals
    • More Powered Top & full Width Bottom Rolls then most of our competition
    • Pneumatic Pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls
    • Pneumatic Pressure - easily adjusted to Side head Holdover Rolls as well as the Top Head Chipbreaker(s)
    • Precision Spindle Assemblies each including 4 Super Precision Bearings for highest tolerances
    • Spindles Speeds are std. 7,200 RPM and 8,000 RPM is optional
    • Each spindle is driven by an individual motor for powerful machining and easy control
    • Hard-Chrome Plating on all Table Surfaces, Chip breakers, Pressure Plates and Main Guide for maximum wear resistance
    • Dual Digital Counters on Near Side Head & To Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chipbreakers & Pressure Plate(s)
    • Automatic Table Lube System included
    • Central Grease Lubrication System - lubrication points located from front of machine
    • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 - can convert to single phase optional

    Available Options:

    • Special machine & Head Layout & opposite Handed Configurations available on Request:
    • 10.2", 12" or 13" Wide; 8" or 10" Thickness - optional
    • REC Setworks - Programmable controller prvides convenient thickness & width of cut settings. More Powered Top & Full Width Bottom Rolls then most of our competition. (See Optional SmartSet Controls listed below and in Separate Section)
    • SmartSet 100 - Operator Touch Screen Controls to load desired sizes and download to the machine which is equipped with Dual Electronic Digital Readouts - Top Desired position and bottom actual set position. (See SmartSet Separate Section)
    • SmartSet 200 - PLC Trouch Screen Control with desired Set Positions; Machine has 2 Dual Digital Readouts for each spindle 1 - Desired Position & other for Actual Position - Ball Screws each axis (See Separate SmartSet Section)
    • SmartSet 300 & 400 - Touch Screen Moulder Control System - Maintain all history files, downloads info fromt he grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. (See SmartSet Sparate Section)
    • Quick Axial Set of 4" (100mm) adjustment to the side heads - so that you can stack heads on top of each other for quick pattern changes
    • Hydro-Loc Outboards for horizontal spindle support on wider machiens
    • Grooved Beds for very Short Stock Feeding
    • Universal Head or Rip Attachment is optional
    • CE Specifications and 380 or 415/3/50 electrics also available

    For additional information and shipping quotes...

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Email sales@firstchoiceind.net
    Phone 678.642.9722
    Learn More

  10. Leadermac Hypermac Moulder Series - Configured with 1 - 11 Heads

    Leadermac Hypermac Moulder Series - Configured with 1 - 11 Heads and up to 130/150 FPM

    Contact Us For Price

    Leadermac Hypermac Moulder Series - Configured with 1-11 Heads and up to 130/150FPM

    Range of the Compact Series Configurations:

    Working Widths - 9", 10.2", 12", 13", 15.75
    # Heads -1-11 Heads
    Type - Unjointed
    Feed Speed - up to 130/150 FPM

    Technical Specifications:

    • 9", 10.2", 12", 13" or 15.75" Widths; 1/4"- 6", 8" or 10" Thickness
    • 1 to 11 Heads>
    • Feed Speeds to 120 or 150 FPM
    • Full Sound & Safety Enclosure with internal lighting system
    • One-piece, cast iron machine frame is specially heat treated for standard configurations
    • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
    • Feed system is Chainless Full HD Cardan Shafft Drive with very heavy gearboxes and universals
    • Faster Feed Speeds of up to 120fpm(40m/min) are standard and to 150fpm(45m/min)
    • Pneumatic pressure of the Top Feed Rolls can be easily set to provide the best feed rool pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls
    • Pneumatic Pressure - easily adjusted to Side head Holdover Rolls as well as the Top Head Chipbreaker(s)
    • Precision Spindle Assemblies each including 4 Super Precision Bearings for highest tolerances and Outboard Hydro-Loc Bearing Assemblies on wider machines
    • Spindles Speeds are std. 6,000rpm and 7,200rpm/8,000rpm are optional
    • Each spindle is driven by an individual motor for powerful machinging and easy control
    • REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & Full Width Bottom Rolls then most of our competition. (See Optional SmartSet Controls listed below and in separate section)
    • Hard-Chrome Plating to all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide for maximum wear resistance
    • Digital Counters on all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s)
    • Automatic Table Lube System included
    • Central Grease Lubrication System - lubrication points located from front of machine
    • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 - can convert to single phase and other voltages optional

    Available Options:

    • Special machine & Head Layout & opposite Handed Configurations available on Request:
    • SmartSet 100 - Operator Touch Screen Controls to load desired sizes and download to the machine which is equipped with Dual Electronic Digitial Readouts - Top Desired position and bottom actual set position =
    • SmartSet 300 & 400 - Touch Screen Moulder Control System - Maintain all history files, downloads info from the grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. =
    • H.D. 2/1 & 2/2 Feedworks for Rough Material or Tough application Hi-Speed Feeding
    • Quick Axial Set of 4" (100mm) adjustment to the side heads - so that you can stack heads on top of each other for quick pattern changes
    • Hydro-Loc Outboards for horizontal spindle support on high speed & wider machines
    • Tilting Top Beam, Chipbreaks &/or Pressure Plate
    • Angling Side Head Spindle(s)
    • Grooved Beds for very Short Stock Feeding
    • Universal Head or Rip Attachment is optional
    • Stand Alone Operators Console &/or remote Hand held Pendant control
    • CE Specifications and 380 or 415/3/50 electrics also available

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net

    Learn More

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction