678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Leadermac Platinum Moulder Series - Configured with 1-9 Heads and up to 120FPM

Availability: In stock

Contact Us For Price

Quick Overview

Leadermac Platinum Moulder Series

Competitively Priced - Custom Configurations and Adaptable Features

Range of the Compact Series Configurations:

Working Widths - 9", 10.2", 12", 13"
# Heads -1-9 Heads
Type - Unjointed

Feed Speed - up to 120FPM

Technical Specifications:


  • 9", 10.2" 12" OR 13" Width; 6", 8" or 10" Thickness Capacity
  • 1 to 9 Heads
  • Feed Speeds to 100FPM(30m/min)
  • Full Sound & Safety Enclosure
  • One-piece, Cast Iron Machine Frame
  • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns(at each end) and includes Motorized vertical adjustment of feed beam
  • Feed System is Full HD Cardan Shaft with very heavy gearboxes adn universals
  • More Powered Top & full Width Bottom Rolls then most of our competition
  • Pneumatic Pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls
  • Pneumatic Pressure - easily adjusted to Side head Holdover Rolls as well as the Top Head Chipbreaker(s)
  • Precision Spindle Assemblies each including 4 Super Precision Bearings for highest tolerances
  • Spindles Speeds are std. 7,200 RPM and 8,000 RPM is optional
  • Each spindle is driven by an individual motor for powerful machining and easy control
  • Hard-Chrome Plating on all Table Surfaces, Chip breakers, Pressure Plates and Main Guide for maximum wear resistance
  • Dual Digital Counters on Near Side Head & To Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chipbreakers & Pressure Plate(s)
  • Automatic Table Lube System included
  • Central Grease Lubrication System - lubrication points located from front of machine
  • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 - can convert to single phase optional

Available Options:


  • Special machine & Head Layout & opposite Handed Configurations available on Request:
  • 10.2", 12" or 13" Wide; 8" or 10" Thickness - optional
  • REC Setworks - Programmable controller prvides convenient thickness & width of cut settings. More Powered Top & Full Width Bottom Rolls then most of our competition. (See Optional SmartSet Controls listed below and in Separate Section)
  • SmartSet 100 - Operator Touch Screen Controls to load desired sizes and download to the machine which is equipped with Dual Electronic Digital Readouts - Top Desired position and bottom actual set position. (See SmartSet Separate Section)
  • SmartSet 200 - PLC Trouch Screen Control with desired Set Positions; Machine has 2 Dual Digital Readouts for each spindle 1 - Desired Position & other for Actual Position - Ball Screws each axis (See Separate SmartSet Section)
  • SmartSet 300 & 400 - Touch Screen Moulder Control System - Maintain all history files, downloads info fromt he grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. (See SmartSet Sparate Section)
  • Quick Axial Set of 4" (100mm) adjustment to the side heads - so that you can stack heads on top of each other for quick pattern changes
  • Hydro-Loc Outboards for horizontal spindle support on wider machiens
  • Grooved Beds for very Short Stock Feeding
  • Universal Head or Rip Attachment is optional
  • CE Specifications and 380 or 415/3/50 electrics also available

For additional information and shipping quotes...

Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

Email sales@firstchoiceind.net
Phone 678.642.9722

 Leadermac Platinum Moulder Series - Configured with 1-9 Heads and up to 120FPM

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  •  Leadermac Platinum Moulder Series - Configured with 1-9 Heads and up to 120FPM
  •  Leadermac Platinum Moulder Series - Detail 1
  •  Leadermac Platinum Moulder Series - Detail 2
  •  Leadermac Platinum Moulder Series - Detail 3

Details

Leadermac Platinum Noulder Series

Standard Features:

Working Width 0.78"-9.1", 102.:, 12" or 13"
(20-230mm, 160mm, 300mm or 330mm)
Working Thickness 0.39"-6", 8" or 10"
(10-150mm, 200mm or 250mm)
Number of spindles 1-9
Motor capacity per spindle 7.5HP to 30HP
Spindle Speed 7200 or 8000 RPM
Spindle diameter 1-13/16", 40mm(1.6") or 50mm or 1 1/2"
Feed motor (standard) 5HP
Feed Speed, infinitely variable 19.5-100FPM (6-30m/min)
Adjustment range: infeedtable
& edge-jointing fence
0.4" (10mm)
Length of infeed table 78.7"(2m); 98"(2.5m) or 120"(3m)


For complete info, contact authorized and factory-trained Leadermac Machinery Dealer . . .

First Choice Industrial

Phone: 678-642-9722
Email: sales@firstchoiceind.net