678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Leadermac Hypermac Moulder Series - Configured with 1 - 11 Heads and up to 130/150 FPM

Availability: In stock

Contact Us For Price

Quick Overview

Leadermac Hypermac Moulder Series - Configured with 1-11 Heads and up to 130/150FPM

Range of the Compact Series Configurations:

Working Widths - 9", 10.2", 12", 13", 15.75
# Heads -1-11 Heads
Type - Unjointed
Feed Speed - up to 130/150 FPM

Technical Specifications:


  • 9", 10.2", 12", 13" or 15.75" Widths; 1/4"- 6", 8" or 10" Thickness
  • 1 to 11 Heads>
  • Feed Speeds to 120 or 150 FPM
  • Full Sound & Safety Enclosure with internal lighting system
  • One-piece, cast iron machine frame is specially heat treated for standard configurations
  • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
  • Feed system is Chainless Full HD Cardan Shafft Drive with very heavy gearboxes and universals
  • Faster Feed Speeds of up to 120fpm(40m/min) are standard and to 150fpm(45m/min)

  • Pneumatic pressure of the Top Feed Rolls can be easily set to provide the best feed rool pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls

  • Pneumatic Pressure - easily adjusted to Side head Holdover Rolls as well as the Top Head Chipbreaker(s)

  • Precision Spindle Assemblies each including 4 Super Precision Bearings for highest tolerances and Outboard Hydro-Loc Bearing Assemblies on wider machines

  • Spindles Speeds are std. 6,000rpm and 7,200rpm/8,000rpm are optional

  • Each spindle is driven by an individual motor for powerful machinging and easy control

  • REC Setworks - Programmable controller provides convenient thickness & width of cut settings. More Powered Top & Full Width Bottom Rolls then most of our competition. (See Optional SmartSet Controls listed below and in separate section)

  • Hard-Chrome Plating to all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide for maximum wear resistance

  • Digital Counters on all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s)

  • Automatic Table Lube System included

  • Central Grease Lubrication System - lubrication points located from front of machine

  • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 - can convert to single phase and other voltages optional



Available Options:


  • Special machine & Head Layout & opposite Handed Configurations available on Request:

  • SmartSet 100 - Operator Touch Screen Controls to load desired sizes and download to the machine which is equipped with Dual Electronic Digitial Readouts - Top Desired position and bottom actual set position =

  • SmartSet 300 & 400 - Touch Screen Moulder Control System - Maintain all history files, downloads info from the grinding room, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. =

  • H.D. 2/1 & 2/2 Feedworks for Rough Material or Tough application Hi-Speed Feeding

  • Quick Axial Set of 4" (100mm) adjustment to the side heads - so that you can stack heads on top of each other for quick pattern changes

  • Hydro-Loc Outboards for horizontal spindle support on high speed & wider machines

  • Tilting Top Beam, Chipbreaks &/or Pressure Plate

  • Angling Side Head Spindle(s)

  • Grooved Beds for very Short Stock Feeding

  • Universal Head or Rip Attachment is optional

  • Stand Alone Operators Console &/or remote Hand held Pendant control

  • CE Specifications and 380 or 415/3/50 electrics also available


Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

Phone 678.642.9722 

Email sales@firstchoiceind.net

Leadermac Hypermac Moulder Series - Configured with 1 - 11 Heads

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Leadermac Hypermac Moulder Series - Configured with 1 - 11 Heads
  • Leadermac Hypermac Moulder Series - Detail 1
  • Leadermac Hypermac Moulder Series - Detail 2
  • Leadermac Hypermac Moulder Series - Detail 3

Details

Leadermac Hypermac Moulder Series

Working Width 0.78"-9.1", 10.2", 12", 13" or 15.75"
(20-230mm, 160mm, 300mm, 330mm or 400mm)
Working Thickness 1/4"-6", 8" or 10"
(10-150mm, 200mm or 250mm)
Number of spindles 1-11
Motor capacity per spindle 7.5HP to 40HP
Feed motor (VFD Controlled) 7.5HP to 20HP
Spindle Speed 6000, 7200 or 8000 RPM
Spindle diameter 1-13/16", 2 1/8", 40mm or 50mm
Feed speed, infinitely variable 19.5-120 FPM(6-36m/min), 150FPM(45m.min)
or 200FPM(60m.min) are optional
Length of the infeed table 32"(0.8m), 55"(14.m), 78.7"(2m); 98"(2.5m) or 120"(3m)

For complete info, contact authorized and factory-trained Leadermac Machinery Dealer . . .

First Choice Industrial

Phone: 678-642-9722
Email: sales@firstchoiceind.net