678-642-9722  |   sales@firstchoiceind.net

New & Used Woodworking Machinery & Equipment

Cantek Edgebander - Model: MX330 - Available in Single and 3 Phase

Availability: In stock

Contact Us For Price

Quick Overview

Cantek Edgebander - Available in Single and 3 Phase - Model: MX330

The MX330 Edgebander, from Cantek, is an entry level edgebander for the small cabinet shop capable of edgebanding up to 2mm edge tape. and applications from .016" - .118" (0.4 - 3mm) coiled tape and strip feed up to 1575" 94mm) edging.  It is also equipped with front and rear end trim, top & bottom trim and buffing working units.

Highlighted Features:

  • Entry level edgebander packed with features at an economical price
  • Available in 1-phase or 3-phase electrics
  • Heated infeed fence pre-heats the panel for better glue penetration
  • Equipped with 1.1 kg teflon coated glue pot for granulated glue. 
  • (5) glue pot heating elements ensure a quick heat up time.
  • Glue temperature is electronically controlled and is automatically lowered when the machine is not in use. 
  • Steel serrated glue spindle applied glue to the edge of the material.  Can be adjusted for optimum gluing results.
  • Pneumatic edgebanding cut off device (max. 3mm) with exclusion from the PLC control
  • Dual saw blade flush end trim
  • Top & bottom trimmers with mechanical digital readouts for accurate and fast adjustment
  • Top & bottom buffing units
  • User friendly PLC control.  Working units can be turned on and off individually when not required. 
  • Automatic feed by belt feed with (11) adjustable table rollers to ensure workpiece is held against the fence
  • Numerical panel thickness indicator
  • Adjustable infeed fence to compensate for edge thickness
  • Extendable side support arm for assisting with larger panels
  • Coil tape roller support: 800mm capacity
  • Belt feed can be opened up for access to machine for blade / buffing wheel change & machine maintenance.
  • 4” dust port
  • Comes with casters which can be mounted to allow you to move the machine out of the way when not in use.

For additional information and shipping quotes...

Contact Stan, at First Choice Industrial
Phone 678.642.9722 

Email sales@firstchoiceind.net

Cantek MX330 Edgebander - First Choice Industrial - Full Service Woodworking Machinery Distributor.

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Cantek MX330 Edgebander - First Choice Industrial - Full Service Woodworking Machinery Distributor.
  • Cantek MX330 Edgebander - Detail Glue Spindle and Pressure Section
  • Cantek MX330 Edgebander - Detail Top and Bottom Buffing Units
  • Cantek MX330 Edgebander - Detail Top and Bottom Trimming
  • Cantek MX330 Edgebander -Detail End Trim Saw
  • Cantek MX330 Edgebander -Detail Glue Pot for Granulated Glue
  • Cantek MX330 Edgebander - Detail Operator Control Panel


Cantek Edgebander - Single Phase Model: MX330

Technical Specifications:

Edge thickness capacity
- Coil edge 0.4 Ì´ 3mm
- Strip 4mm
Panel thickness 12 Ì´ 45mm  (mechanical panel thickness readout)
Min. panel length 240mm
Min. panel width 90mm
Heated infeed fence power 0.32 kW
Glue motor 0.18 kW (¼ HP)
Heating elements power 5 pcs. @ 1.13 kW total
End trimming motor 0.18 kW (¼ HP)
Top/Bottom flush trimming motor 0.56 kW (¾ HP)
Buffing unit 2 @ 0.12 kW
Feed speed 5 m/min
Coil magazine capacity 800mm
Work table length 2000mm
Dust port 4” (100mm)
Total power installed 3.2 kW
Compressed air required 6 kgs/cm2 (85 PSI)
@ 0.75 L/min (0.027 CFM)
Shipping weight 464 kgs. (1021 lbs.)
Shipping dimensions 2110 x 720 x 1260mm

We are a full-service Cantek Distributor, serving customers nationwide, contact us today for complete info...

First Choice Industrial
Phone: 678-642-9722
Email: sales@firstchoiceind.net