678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Cantek Edgebanders

First Choice Industrial offers a large selection of high quality Industrial edgebanders, manufactured by Cantek.  Built to exacting North American standards by the most reputable factories in Taiwan, Cantek offers our customer the best of both worlds: North American design quality and excellent overall dollar value, it's what Cantek is all about.

8 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Cantek MX330 Edgebander - First Choice Industrial - Full Service Woodworking Machinery Distributor.

    Cantek Edgebander - Model: MX330 - Available in Single and 3 Phase

    $9,990.00

    Cantek Edgebander - Available in Single and 3 Phase - Model: MX330

    The MX330 Edgebander, from Cantek, is an entry level edgebander for the small cabinet shop capable of edgebanding up to 2mm edge tape. and applications from .016" - .118" (0.4 - 3mm) coiled tape and strip feed up to 1575" 94mm) edging.  It is also equipped with front and rear end trim, top & bottom trim and buffing working units.

    Highlighted Features:

    • Entry level edgebander packed with features at an economical price
    • Available in 1-phase or 3-phase electrics
    • Heated infeed fence pre-heats the panel for better glue penetration
    • Equipped with 1.1 kg teflon coated glue pot for granulated glue. 
    • (5) glue pot heating elements ensure a quick heat up time.
    • Glue temperature is electronically controlled and is automatically lowered when the machine is not in use. 
    • Steel serrated glue spindle applied glue to the edge of the material.  Can be adjusted for optimum gluing results.
    • Pneumatic edgebanding cut off device (max. 3mm) with exclusion from the PLC control
    • Dual saw blade flush end trim
    • Top & bottom trimmers with mechanical digital readouts for accurate and fast adjustment
    • Top & bottom buffing units
    • User friendly PLC control.  Working units can be turned on and off individually when not required. 
    • Automatic feed by belt feed with (11) adjustable table rollers to ensure workpiece is held against the fence
    • Numerical panel thickness indicator
    • Adjustable infeed fence to compensate for edge thickness
    • Extendable side support arm for assisting with larger panels
    • Coil tape roller support: 800mm capacity
    • Belt feed can be opened up for access to machine for blade / buffing wheel change & machine maintenance.
    • 4” dust port
    • Comes with casters which can be mounted to allow you to move the machine out of the way when not in use.

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  2. Cantek Edgebander - Model: MX370A

    Cantek Edgebander - Model: MX370A

    $31,970.00

    Cantek Edgebander - Model: MX370A

    The MX370A from Cantek is  an affordable, compact, and durable edgebander.  This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

    Featured Specifications:

    • Touch screen control for operator convenience
    • Equipped with line control for precise timing adjustment of working units.
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS
    • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers
    • Pre-milling function can remove up to 1mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels.  (2) counter rotating diamond cutterheads for optimum cut results.
    • High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades
    • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • High frequency corner rounding unit can process 0.4-3mm thick edgebanding by tracing the shape of the panel
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  3. Cantek Portable Edgebander Package - Model MX550AU

    Cantek Portable Edgebander Package - Model MX550AU

    $2,300.00

    Cantek Portable Edgebander Package - Model MX550AU

    Ergonomic - Intuitive Controls

    Package Includes:

    • PD80 Power Trimmer
    • TK65 Dual End Cutter
    • VH03 Vacuum Clamp Set
    • (1) Unit of Glue
    • Trolley / Dolly

    Featured Specifications:

    • Straightforward operation
    • Simple maintenance
    • Edgebands straight and curved surfaces
    • Portable and optional stationary edgebanding application
    • Automatic glue application
    • Works on 75-90° surfaces
    • Built to run without overheating
    • 2-6 M/min variable speed feeding

    Rubber Grips and Metal Support Plate

    Two rubber grips allow for precise control, while a metal support plate designed to rest on the workpiece allow for strain-free use.

    Easy On/Off Switch
    The feeder on/off switch is located on top of the primary handle, allowing for immediate control of the tool’s operation

    Adjustable Glue Pot Handle
    The glue pot handle has two positions in case of work piece interference.

    Tape Insert Guide
    A measured guide in increments of 1mm determines the width of the edgeband or edging tape and secures it in place for a regulated feed.

    Consistent Glue Application
    A knob allows for on-the-fly regulation of glue amount for a mess-free, consistent result.

    Digital Temperature Monitor
    A digital temperature monitor provides accurate control over glue application. Temperature ranges are 120°C – 200°C ±1°C (250°F – 390°F ±34°F)

    Edgebanding Made Simple

    Straightline and Contour Edgebanding
    Our portable edgebanders are perfect for all varieties and shapes of workpieces. For contoured or curved surfaces, the minimum interior radius is 25mm.

    No Edgeband Iron or Hot Air Required
    The glue is applied directly onto the edgeband or edging tape. Maintain steady pressure on the workpiece against the feeding roller to apply the edgeband or edging tape at desired temperature.

     Glue-Free Edgebands
    Save money on your edgebands. By not requiring edgebands or edging tape with pre-applied glue, our portable edgebanders help reduce your costs.

    Material Compatibility
    The tool works with PVC, melamine, laminate, wood and metal edgebands and edge tape of 0.3mm – 3mm thickness and 10mm – 65mm width.

    Angle Adjustment
    Our edgebanders can operate on tilted surfaces of 75°-90°, making beveled surfaces as simple as perpendicular ones.

    Quick to Start
    Cantek portable edgebanders need around 8 minutes to warm up from a cold start, and no warm-up time if the gluepot is refilled when at half capacity or more during operation.

    Built to Last
    Other edgebanders may require cool down times – not ours. Our machines are strenuously tested during QA.

    Portable and Stationary Use
    Designed for transportation and space-efficiency, our edgebanders come with a durable and lightweight case. For handheld operation, workpieces can be secured with our VH03 Vacuum Clamp Set. For stationary operation, our edgebanders can also be secured to our ST95A Stationary Worktable depending on your needs.

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  4. Cantek Edge Bander - Model MX340M

    Cantek Edgebander - Model: MX340M - Available in Single and 3 Phase

    $11,970.00

    Cantek Edgebander - Model: MX340M - Available in Single and 3 Phase

    The MX340M from Cantek is designed to be a compact & durable entry level edgebander offered at an affordable price. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm & wood strips up to 4mm.

    Highlights:

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800 mm (31.5”), for PVC/ABS
    • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material up to 4mm can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
    • 12000 RPM dual saw blade (80mm / 3.15”) end trimming unit
    • 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Top & Bottom trimmers use copy tracing wheels for optimum finishing results without scratching the face of the workpiece
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration
    • Mechanical digital readouts for convenient and quick adjustment to the working units & thickness

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722  

    Email sales@firstchoiceind.net Learn More

  5. Cantek Automatic Edgebander with Pre-Milling - Model MX350M

    Cantek Edgebander with Pre-Milling - Model: MX350M - Available in Single and 3 Phase

    $14,570.00

    Cantek Automatic Edgebander with Pre-Milling - Model: MX350M - Available in Single and 3 Phase

    The MX340M from Cantek is designed to be a compact & durable entry level edgebander with pre-milling function offered at an affordable price. This machine is equipped with pre-milling, end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm & wood strips up to 4mm.

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800 mm (31.5”), for PVC/ABS
    • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material up to 4mm can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
    • Pre-milling unit with (2) counter rotating diamond cutterheads for precise edge quality.
    • 12000 RPM dual saw blade (80mm / 3.15”) end trimming unit
    • 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Top & Bottom trimmers use copy tracing wheels for optimum finishing results without scratching the face of the workpiece
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration
    • Mechanical digital readouts for convenient and quick adjustment to the working units & thickness

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722             

    Email sales@firstchoiceind.net

    Learn More
  6. Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

    Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

    $15,690.00

    Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

    3 Phase Pricing:  $15,690.00
    Single Phase Pricing: $15,880

    The MX340 Edgebander, from Cantek,  is an affordable  compact, and durable edgebander, equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800 mm, for PVC/ABS
    • Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers
    • High frequency 12000 RPM end trimming unit, with Ø100 mm TC-Saw blades
    • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  7. Cantek High Frequency Edgebander with Pre-Milling - Model MX350

    Cantek High Frequency Edgebander with Pre-Milling - Model: MX350 - Available in Single and 3 Phase

    $21,240.00

    Cantek High Frequency Edgebander with Pre-Milling - Model: MX350 - Available in Single and 3 Phase

    3 Phase Pricing: $21,240
    Single Phase: $21,430

    The MX350 from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

    Features:

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800mm (31 1/2"), for PVC/ABS
    • Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers
    • Pre-milling function can remove up to 1mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels.  Consist of (2) counter rotating diamond cutterheads for optimum cut results.
    • High frequency 12000 RPM end trimming unit, with Ø100 mm (4") TC-Saw blades
    • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  8. Cantek Edgebander with Corner Rounding - Model MX360A

    Cantek Edgebander with Corner Rounding - Model: MX360A

    $27,000.00

    Cantek Edgebander with Corner Rounding - Model: MX360A

    Features:

    The MX360A from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with end trimming, flush trimming, corner rounding, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

    • Touch screen control for operator convenience
    • Equipped with line control for precise timing adjustment of working units.
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS
    • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers
    • High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades
    • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • High frequency corner rounding unit can process 0.4-3mm thick edgebanding by tracing the shape of the panel
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

8 Item(s)

per page

Grid  List 

Set Descending Direction