678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

Availability: In stock

$16,490.00

Quick Overview

Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

3 Phase Pricing:  $16,490.00
Single Phase Pricing: $16,6900

The MX340 Edgebander, from Cantek,  is an affordable  compact, and durable edgebander, equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

  • PLC control system with LED display and keypad
  • Work-piece is fed by chain
  • Edge coil support plate: Ø 800 mm, for PVC/ABS
  • Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
  • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
  • Teflon-coated hot-melt glue pot
  • Spring loaded pressure unit with (2) pressure rollers
  • High frequency 12000 RPM end trimming unit, with Ø100 mm TC-Saw blades
  • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
  • Radius scraper with 2mm radius
  • 3000 RPM top & bottom buffing units
  • Heavy duty pressure beam with extendable work-piece support
  • Heated infeed fence for pre-heating the panel for optimum glue penetration

For additional information and shipping quotes...

Contact Stan, at First Choice Industrial
Phone 678.642.9722 

Email sales@firstchoiceind.net

Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase
  • Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Detail 2
  • Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Detail 3
  • Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Detail 4
  • Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Detail 5
  • Cantek High Frequency Edgebander with Pre-Milling Model MX340 - Detail 6
  • Cantek High Frequency Edgebander with Pre-Milling Model MX340 - Detail 7
  • Cantek High Frequency Edgebander with Pre-Milling Model MX340 - Detail 8
  • Cantek High Frequency Edgebander with Pre-Milling Model MX340 - Detail 9

Details

Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

Techical Specifications:

Feeding speed 9 meters/min.
Panel thickness 8~45 mm
Edge thickness 0.4 ~ 3 mm
Min. panel width 100 mm
Min. panel length 210 mm
Working table height 850 mm
Dust collection outlet Ø 127 mm (5”)
Electrical consumption 5.5 KW
Electrical requirement 30 amps (Voltage must be +/- 5%)
Voltage 230/3/60
Machine weight 520 kgs
Machine dimensions 2950 x 1370 x 660 mm
Shipping weight 558 kgs
Shipping dimensions 2290 x 720 x 1360 mm

 Motor Specifications:

Feeding motor 0.75 (kW)
Glue spindle motor 0.18 (kW)
Front/rear trimming motor 0.22 (kW)
Upper trimming motor 0.37 (kW)
Lower trimming motor 0.37 (kW)
Upper buffing motor 0.12 (kW)
Lower buffing motor 0.12 (kW)
Pre-heating 0.4 (kW)
Glue pot 1.315 (kW)

We are a full-service Cantek Distributor, serving customers nationwide, contact us today for complete info...

First Choice Industrial
Phone: 678-642-9722
Email: sales@firstchoiceind.net