678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Edgebanders

First Choice Industrial is a full-service, factory trained distributor for New Cantek and New SCM Edgebanders, offering a wide rangle of edgebanding solutions for small, medium, and large edgebanding production applications and budgets. We also offer a full range of high production edgebanding solutions from Olimpic, Stefani and Morbidelli. 

Additonally, we also offer a large inventory of  used edgebanding machines, including...

Items 1 to 10 of 26 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. Cantek Portable Edgebander Package - Model MX550AU

    Cantek Portable Edgebander Package - Model MX550AU

    $1,930.00

    Cantek Portable Edgebander Package - Model MX550AU

    Ergonomic - Intuitive Controls

    Package Includes:

    • PD80 Power Trimmer
    • TK65 Dual End Cutter
    • VH03 Vacuum Clamp Set
    • (1) Unit of Glue
    • Trolley / Dolly

    Featured Specifications:

    • Straightforward operation
    • Simple maintenance
    • Edgebands straight and curved surfaces
    • Portable and optional stationary edgebanding application
    • Automatic glue application
    • Works on 75-90° surfaces
    • Built to run without overheating
    • 2-6 M/min variable speed feeding

    Rubber Grips and Metal Support Plate

    Two rubber grips allow for precise control, while a metal support plate designed to rest on the workpiece allow for strain-free use.

    Easy On/Off Switch
    The feeder on/off switch is located on top of the primary handle, allowing for immediate control of the tool’s operation

    Adjustable Glue Pot Handle
    The glue pot handle has two positions in case of work piece interference.

    Tape Insert Guide
    A measured guide in increments of 1mm determines the width of the edgeband or edging tape and secures it in place for a regulated feed.

    Consistent Glue Application
    A knob allows for on-the-fly regulation of glue amount for a mess-free, consistent result.

    Digital Temperature Monitor
    A digital temperature monitor provides accurate control over glue application. Temperature ranges are 120°C – 200°C ±1°C (250°F – 390°F ±34°F)

    Edgebanding Made Simple

    Straightline and Contour Edgebanding
    Our portable edgebanders are perfect for all varieties and shapes of workpieces. For contoured or curved surfaces, the minimum interior radius is 25mm.

    No Edgeband Iron or Hot Air Required
    The glue is applied directly onto the edgeband or edging tape. Maintain steady pressure on the workpiece against the feeding roller to apply the edgeband or edging tape at desired temperature.

     Glue-Free Edgebands
    Save money on your edgebands. By not requiring edgebands or edging tape with pre-applied glue, our portable edgebanders help reduce your costs.

    Material Compatibility
    The tool works with PVC, melamine, laminate, wood and metal edgebands and edge tape of 0.3mm – 3mm thickness and 10mm – 65mm width.

    Angle Adjustment
    Our edgebanders can operate on tilted surfaces of 75°-90°, making beveled surfaces as simple as perpendicular ones.

    Quick to Start
    Cantek portable edgebanders need around 8 minutes to warm up from a cold start, and no warm-up time if the gluepot is refilled when at half capacity or more during operation.

    Built to Last
    Other edgebanders may require cool down times – not ours. Our machines are strenuously tested during QA.

    Portable and Stationary Use
    Designed for transportation and space-efficiency, our edgebanders come with a durable and lightweight case. For handheld operation, workpieces can be secured with our VH03 Vacuum Clamp Set. For stationary operation, our edgebanders can also be secured to our ST95A Stationary Worktable depending on your needs.

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  2. SCM Single Sided Edgebander - Olimpic K230 EVO

    SCM Single Sided Edgebander - Olimpic K230 EVO

    Contact Us For Price

    SCM Single Sided Edgebander - Olimpic K230 EVO - Max. 3mm Thickness

    The Olimpic K230 EVO automatic single sided edgebander, manufactured by SCM, is ideal for edgebanding straight vertical profiles with coiled venner, PVC and high-pressure laminate and solid wood strips with a maximum thickness of 3mm.

    Capacities and Speed:

    • Edgebanding thickness: .4mm - 3mm(.016-1/8")
    • Guillotine capacity: 3.0mm
    • Feed Speed: 30 ft/min
    • Panel height: 3/8" min - 1 15/16" max
    • Minimum panel length: 5 1/2"
    • Minimum panel widith: 2 3/8"
    • Minimum distance between panels: 22"

    Controller Info:

    • Orion 1 Plus controller, fixed - located at the infeed of the machine. It is capable of operating all the work units via soft touch buttons, it pneumatically tilt’s the end trim unit from the control panel, it eliminates the use of micro switches, as well as control the temperature of the glue. It is tilted slightly upward for a more ergonomically friendly position for the operator.

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  3. SCM Olimoic K360 Edgebander Series

    SCM Olimpic K360 Single-Sided Edgebander with Touch 7 Controller

    Contact Us For Price

    SCM Olimpic K360 Edgebander

    The Olimpic K360 Edgebander, manufactured by SCM, is for edgebanding straight vertical profiles with coiled veneer or PVC material and  high pressure laminate or solid wood strips strips with a maximum 3mm thickness.

    Highlighted Features:

    • Touch7 Controller
    • 7” Touch Screen
    • Capable of storing 60 programs
    • Standard on ALL Versions
    • Available in mm’s or inches
    • Available in 5 languages
    • Swivels and Tilts for easy viewing

    Technical Specifications:

    • Machine Base - The machine base is made of a tubular steel structure and is designed to assure maximu m stability and accuracy.
    • Pressure Beam
    • Capacities and Speed
    • Edgebanding thickness
    • Glue Station
      • 4mm-3mm (.016-1/8”)
      • Guillotine capacity: 3.0mm
      • Feed speed: 30 ft/min.
      • Panel height: 3/8” min –1 15/16” max
      • Minimum panel length: 5 1/2”
      • Minimum panel width 2 3/8"
      • Minimum distance between panels: 22"
      • Pressure Section and Automatic Strip Magazine
      • Orion 1 Plus Controller
      • End Trimming Station
      • Edge Trimming Station
      • RC-V Glue Scraping Unit
      • Buffing Unit
      • Acoustical Safety Enclosure
      • Centralized Dust Extraction

      For additional information and shipping quotes...

      Contact Stan, at First Choice Industrial
      Phone 678.642.9722 

      Email sales@firstchoiceind.net Learn More

  4. SCM Olimpic K560 HP ERT - Single Sided Edgebander

    SCM Olimpic K 560 HP/ERT - Single Sided Edgebander

    Contact Us For Price

    SCM Olimpic K560  HP/ERT - Single  Sided  Edgebander

    The Olimpic K560 automatic single-sided edgebander, manufactured by SCM, is designed for edgebanding straight vertical profiles with venner and PVC coiled material high- pressure laminate and solid wood strips with a maximum thickness of 8mm.

    Technical Specifications:

    Machine Base

    The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

    Electronic Top Pressure Beam

    All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings.

    Capacities and Speed

    • ·Edgebanding thickness: .4mm -8mm (.016-5/16”)
    • ·Guillotine capacity: 3mm
    • ·Feed speed: 40/60 ft/min.
    • ·Panel height: 3/8” min –2 1/8” max
    • ·Minimum panel length: 5 1/2”
    • ·Minimum panel width: 2 3/8”
    • ·Minimum distance between panels: 20”

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  5. SCM Minimax Contour Edgebander - Model e10

    SCM Formula E10 Contour Edgebander

    Contact Us For Price

    SCM Contour Edgebander - Model Formula E 10

    This contour edgebander, manufactured by SCM Group, is ideal for distressing and structuring applications.

    Standard Equipment:

    • High rigidity and stability steel monoblock base
    • Anti-scratch phenolic multilayer work table with modular holes complete with front extension support for large panels
    • Shear device for rolled edges complete with roll-holder plate
    • Teflon-coated hot melt glue pot installed underneath the worktable to ensure continuous glue recirculation and helps to avoid the glue overheating.
    • Powerful heating system (approx 7 min.) for an immediate use with timed stand-by
    • Glue application of edging material by means of a powered glue spreading roller and (1) powered pressure roller
    • It is possible to apply edges on square, shaped and round panels
    • Start/stop cycle pedal
    • Wheels for mobility

    Contact First Choice Industrial today

    Phone: 678-642-9722
    Email:
    sales@firstchoiceind.net

    Learn More

  6. Cantek Edge Bander - Model MX340M

    Cantek Edgebander - Model: MX340M - Available in Single and 3 Phase

    $12,790.00

    Cantek Edgebander - Model: MX340M - Available in Single and 3 Phase

    The MX340M from Cantek is designed to be a compact & durable entry level edgebander offered at an affordable price. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm & wood strips up to 4mm.

    Highlights:

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800 mm (31.5”), for PVC/ABS
    • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material up to 4mm can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
    • 12000 RPM dual saw blade (80mm / 3.15”) end trimming unit
    • 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Top & Bottom trimmers use copy tracing wheels for optimum finishing results without scratching the face of the workpiece
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration
    • Mechanical digital readouts for convenient and quick adjustment to the working units & thickness

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722  

    Email sales@firstchoiceind.net Learn More

  7. Cantek Automatic Edgebander with Pre-Milling - Model MX350M

    Cantek Edgebander with Pre-Milling - Model: MX350M - Available in Single and 3 Phase

    $16,380.00

    Cantek Automatic Edgebander with Pre-Milling - Model: MX350M - Available in Single and 3 Phase

    The MX340M from Cantek is designed to be a compact & durable entry level edgebander with pre-milling function offered at an affordable price. This machine is equipped with pre-milling, end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm & wood strips up to 4mm.

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800 mm (31.5”), for PVC/ABS
    • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material up to 4mm can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
    • Pre-milling unit with (2) counter rotating diamond cutterheads for precise edge quality.
    • 12000 RPM dual saw blade (80mm / 3.15”) end trimming unit
    • 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Top & Bottom trimmers use copy tracing wheels for optimum finishing results without scratching the face of the workpiece
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration
    • Mechanical digital readouts for convenient and quick adjustment to the working units & thickness

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722             

    Email sales@firstchoiceind.net

    Learn More
  8. Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

    Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

    $16,490.00

    Cantek High Frequency Edgebander with Pre-Milling Model: MX340 - Available in Single and 3 Phase

    3 Phase Pricing:  $16,490.00
    Single Phase Pricing: $16,6900

    The MX340 Edgebander, from Cantek,  is an affordable  compact, and durable edgebander, equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800 mm, for PVC/ABS
    • Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers
    • High frequency 12000 RPM end trimming unit, with Ø100 mm TC-Saw blades
    • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  9. Cantek High Frequency Edgebander with Pre-Milling - Model MX350

    Cantek High Frequency Edgebander with Pre-Milling - Model: MX350 - Available in Single and 3 Phase

    $21,990.00

    Cantek High Frequency Edgebander with Pre-Milling - Model: MX350 - Available in Single and 3 Phase

    3 Phase Pricing: $21,990
    Single Phase: Call for Pricing

    The MX350 from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

    Features:

    • PLC control system with LED display and keypad
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800mm (31 1/2"), for PVC/ABS
    • Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers
    • Pre-milling function can remove up to 1mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels.  Consist of (2) counter rotating diamond cutterheads for optimum cut results.
    • High frequency 12000 RPM end trimming unit, with Ø100 mm (4") TC-Saw blades
    • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  10. Cantek Edgebander with Corner Rounding - Model MX360A

    Cantek Edgebander with Corner Rounding - Model: MX360A

    $28,790.00

    Cantek Edgebander with Corner Rounding - Model: MX360A

    Features:

    The MX360A from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with end trimming, flush trimming, corner rounding, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

    • Touch screen control for operator convenience
    • Equipped with line control for precise timing adjustment of working units.
    • Work-piece is fed by chain
    • Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS
    • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
    • Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
    • Teflon-coated hot-melt glue pot
    • Spring loaded pressure unit with (2) pressure rollers
    • High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades
    • High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    • High frequency corner rounding unit can process 0.4-3mm thick edgebanding by tracing the shape of the panel
    • Radius scraper with 2mm radius
    • 3000 RPM top & bottom buffing units
    • Heavy duty pressure beam with extendable work-piece support
    • Heated infeed fence for pre-heating the panel for optimum glue penetration

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

Items 1 to 10 of 26 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction