678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Professional Woodworking Machinery

First Choice Industrial offers a large selection of Professional & Semi Professions Woodworking Machinery & Industrial Equipment.  Located in metro-Atlanta, and serving solid wood, mdf, chipboard, plastic, composites, light alloys, and non-ferrous metals manufacturers nationwide, we offer a full range of services, including Asset Recovery, Remarketing, Consignment Sales, Evaluation, Liquidation, Repair, Installation, Storage & More!

Items 1 to 10 of 409 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. Leadermac Maximac Moulder Series

    Leadermac Maximac Moulder Series - Configured with 1-11 Heads and 200, 260, 300 or 400 FPM

    Contact Us For Price

    Leadermac Maximac Moulder Series - Configured with 1-11 Heads and 200, 260, 300 or 400 FPM

    The Maximac Moulder Series, manufactured by Leadermac, features quick electronic setup as standard equipment.

    Technical Specifications:

    • 12″ or 13″ Width; 6″, 8″ or 10″ Thickness; 2 to 10 Heads
    • Feed Speeds to 200FPM(60mpm) or 260FPM(80mpm) or 300FPM(90mpm) or 400FPM(120mpm)
    • 1 piece machine frame specially heat treated & stress relieved
    • 50mm, 1-13/16″, 40mm or 2-1/8″ spindles
    • RHP ABEC 7 precision spindle bearings throughout (4 per spindle)
    • 6000, 7200 or 8000 RPM Spindle Speeds
    • With or without Hydro-Loc Outboards on Horizontals
    • Top rolls variable pneumatic tension
    • Full width bottom driven bedrolls Throughout
    • Straight and/or Profile Jointers throughout optional
    • Full Cardan Shaft Drive, VFD & feed speeds to 120, 200, or 300 FPM
    • Tables/Fences and Chipbreakers are hard chrome plated
    • Quick electronic setup – Std. REC-705B Quik-TrueSet electronic setworks for top heads and near side head – Std equipment
    • Universal head and/or rip saw section optional
    • New Touch Screen Control – Memory & Fastest Setup – Optional (Tied to grinding room measuring station, if desired)
    • Also includes Dual Digital Position Readouts as each head position for fastest setup

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net

    Learn More
  2. SCM Olimpic K560 HP ERT - Single Sided Edgebander

    SCM Olimpic K 560 HP/ERT - Single Sided Edgebander

    Contact Us For Price

    SCM Olimpic K560  HP/ERT - Single  Sided  Edgebander

    The Olimpic K560 automatic single-sided edgebander, manufactured by SCM, is designed for edgebanding straight vertical profiles with venner and PVC coiled material high- pressure laminate and solid wood strips with a maximum thickness of 8mm.

    Technical Specifications:

    Machine Base

    The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

    Electronic Top Pressure Beam

    All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings.

    Capacities and Speed

    • ·Edgebanding thickness: .4mm -8mm (.016-5/16”)
    • ·Guillotine capacity: 3mm
    • ·Feed speed: 40/60 ft/min.
    • ·Panel height: 3/8” min –2 1/8” max
    • ·Minimum panel length: 5 1/2”
    • ·Minimum panel width: 2 3/8”
    • ·Minimum distance between panels: 20”

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  3. SCM Olimoic K360 Edgebander Series

    SCM Olimpic K360 Single-Sided Edgebander with Touch 7 Controller

    Contact Us For Price

    SCM Olimpic K360 Edgebander

    The Olimpic K360 Edgebander, manufactured by SCM, is for edgebanding straight vertical profiles with coiled veneer or PVC material and  high pressure laminate or solid wood strips strips with a maximum 3mm thickness.

    Highlighted Features:

    • Touch7 Controller
    • 7” Touch Screen
    • Capable of storing 60 programs
    • Standard on ALL Versions
    • Available in mm’s or inches
    • Available in 5 languages
    • Swivels and Tilts for easy viewing

    Technical Specifications:

    • Machine Base - The machine base is made of a tubular steel structure and is designed to assure maximu m stability and accuracy.
    • Pressure Beam
    • Capacities and Speed
    • Edgebanding thickness
    • Glue Station
      • 4mm-3mm (.016-1/8”)
      • Guillotine capacity: 3.0mm
      • Feed speed: 30 ft/min.
      • Panel height: 3/8” min –1 15/16” max
      • Minimum panel length: 5 1/2”
      • Minimum panel width 2 3/8"
      • Minimum distance between panels: 22"
      • Pressure Section and Automatic Strip Magazine
      • Orion 1 Plus Controller
      • End Trimming Station
      • Edge Trimming Station
      • RC-V Glue Scraping Unit
      • Buffing Unit
      • Acoustical Safety Enclosure
      • Centralized Dust Extraction

      For additional information and shipping quotes...

      Contact Stan, at First Choice Industrial
      Phone 678.642.9722 

      Email sales@firstchoiceind.net Learn More

  4. SCM Single Sided Edgebander - Olimpic K230 EVO

    SCM Single Sided Edgebander - Olimpic K230 EVO

    Contact Us For Price

    SCM Single Sided Edgebander - Olimpic K230 EVO - Max. 3mm Thickness

    The Olimpic K230 EVO automatic single sided edgebander, manufactured by SCM, is ideal for edgebanding straight vertical profiles with coiled venner, PVC and high-pressure laminate and solid wood strips with a maximum thickness of 3mm.

    Capacities and Speed:

    • Edgebanding thickness: .4mm - 3mm(.016-1/8")
    • Guillotine capacity: 3.0mm
    • Feed Speed: 30 ft/min
    • Panel height: 3/8" min - 1 15/16" max
    • Minimum panel length: 5 1/2"
    • Minimum panel widith: 2 3/8"
    • Minimum distance between panels: 22"

    Controller Info:

    • Orion 1 Plus controller, fixed - located at the infeed of the machine. It is capable of operating all the work units via soft touch buttons, it pneumatically tilt’s the end trim unit from the control panel, it eliminates the use of micro switches, as well as control the temperature of the glue. It is tilted slightly upward for a more ergonomically friendly position for the operator.

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  5. SCM L'Invincibile TF5 Programmable Shaper.

    SCM L'invincibile TF 5 Programmable Shaper

    $40,995.00

     L’invincibile TF 5 Programmable Shaper

    The  L’invincibile TF 5 Programmable Shaper, manufactured by SCM, features the “EASY” four axes programmer controls for the powered sectioned table, spindle height, infeed fence, and outfeed.

    Technical Specifications:

    • 4 Axes “EASY” 7” touchscreen controller for infeed / outfeed fence, “FAST” sectioned table & spindle height with the ability to store up to 300 independent programs
    • Electronic inverter control of spindle speed from controller with slow enough speed for sanding applications
    • (5) HSK 63B spindles 1 ¼ Inch diameter complete with tool rack (this is not a tool cart/trolley)
    • Upper mobile control panel
    • Cope attachment with 500 mm stroke including miter gauge and clamp
    • Flex: swing support fence with electronic adjustment of fence
    • Fast: sectional table to adjust for tool diameter
    • Cross support mount for feeder with readout
    • Aluminum fences
    • Pneumatic device for release of HSK 63B spindle
    • Reverse rotation switch LED digital readout of spindle height, infeed /outfeed fence
    • “Fast” table position, & speed on controller
    • Automatic brake
    • Magnetic starter with overload protection
    • Low tension circuit (110 v by transformer)
    • Tool kit
    • Y—Delta Soft Start

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  6. Formula VF 160 - Negative Pressure Dust Extractor.

    SCM Formula VF 160 - Negative Pressure Dust Extractor

    $5,595.00

    SCM Formula VF 160 - Negative Pressure Dust Extractor

    Compact Design  -  Expandle to Multiple Machines

    The Formulat Series of  clean air dust extractors, available from First Choice Industrial, are specially designed to work in a variety of woodworking shops, guaranteeing a level of dust emissions lower than 0.1 mg / m3..

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net

    Learn More

  7. Leadermac Gluemac Moulder Series

    Leadermac Gluemac Moulder Series with 3-7 Heads and Up to 90 FPM

    $0.00

    Leadermac Gluemac Moulder Series

    The Gluemac Moulder Series, manufactured by Leadermac, features a pre-gluing milling device to ensure perfect gripping of glue surfaces.

    Technical Specifications:

    • Side Head have horizontal spindles for fly type cutterheads (for glue edge preparation
    • 4 to 6 Heads – 9″, 10.2″, 12″, & 13″ Widths
    • One piece machine frame specially heat treated & stress relieved
    • 1-1/2″, 40mm, 1-13/16″ or 50mm diameter spindles standard
    • SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle)
    • 6000, 7200, or 8000 RPM optional
    • Each spindle is driven by individual motors
    • Tables/Fences and Chipbreakers are hard chrome plated
    • Full Cardan Shaft drive with feed speeds up to 82 FPM
    • Top rolls variable pneumatic tensioned
    • Full width bottom driven bedrolls
    • Pneumatic tension top chipbreakers & roll holdovers – Optional
    • Easy head adjustment by mechanical digital readouts
    • Dual Digital Readout available for radial setting (NS & Tops)
    • REC-705B Quik-TrueSet Setworks optional
    • Universal head or rip section optional
    • Safety enclosure serves as chip guard and greatly reduces noise

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net

    Learn More
  8. Leadermac Slicermac Moulder Series

    Leadermac 4 Sided Slicermac Moulder Series - Configured with 1-11 Heads and Vertical Rip Saw

    Contact Us For Price

    Leadermac Slicermac - 4 Sided Moulder Series Configured with 1-11 Heads

    High Capacity  -  High Accuracy  -  Easy Operation

    This 4 sided moulder. manufactured by Leademac, is equipped with two slicing units, one for scoring saw and one for main saw. Additionally, this high capacity moulder features heavy duty spindles and premium housing bearings for superior finish quality.

    Technical Specifications:

    • 9″, 10.2″, 12″, 13″ or 15″ Width; 6″, 8″ or 10″ Thickness Capacity
    • Feed Speeds to 200FPM(60mpm) or 260FPM(80mpm) or 300FPM(90mpm) or 400FPM(120mpm)
    • Full Sound & Safety Enclosure
    • One-piece, Cast Iron Machine Frame is heat treated for ma. stability & rigidity for std. configurations
    • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns
    • Feed System is Chainless Full HD Cardan Shaft with very heavy gearboxes and universals
    • H.D. Infeed System with 8″ (200mm) Dia. Top Rolls
    • Sectional Pneumatic Pressure of the Top Feed Rolls can be easily set to provide the best feed roll pressures
    • Pneumatic Pressure to Side head Holdover Rolls as well as the Top Head Chipbreaker(s) + Side head Chipbreaker(s)
    • Super Precision Spindle Assemblies ea. incl. multiple Super-Precision + outboard Bearings for highest available runout tolerances – hence better finish
    • Spindles Speeds are Std. 6,000 RPM and 7,200/8,000RPM are optional
    • Hydro-Loc Outboards for Horizontal Spindle Support
    • Each spindle is belt driven by an individual HD Motor
    • REC Setworks – Programmable controller provides convenient thickness & width of cut settings. More Powered Top & full Width Bottom Rolls then most of our competition. (See Optional SmarSet Controls listed below and (See Optional SmarSet Controls listed below and in Separate Section)
    • More Powered Top & Full Width Bottom Rolls then most of our competition
    • Exclusive, separate adjustment of the Vertical(Side Head) spindles and the support tables allow the support tables to be positioned extremely close to the side cutterheads to provide added cutting stability
    • Extra Heavy Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates & Main Guide for max. wear resistance
    • Counters for position all Cutterhead axis, Chip Breakers and Pressure Plates
    • Automatic Pneumatic HD Large Tank Capacity Table Lube System included
    • Central Easy Access Grease Lubrication systems
    • Stand alone Operators Console
    • Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/3/50 or415/3/50 if required

    Special machine & Head Layout & opposite Handed Configurations available on Request

    • Feed Speeds to 300FPM(90m/min)  or 400FPM(120m/min)
    • SmartSet 100 – Operator Touch Screen Controls with 250Set Memory to load desired sizes and download to the machine which is equipped with Dual Electronic Digital Readouts – Top Desired position and bottom actual set position also including Quick Open Reset.  
    • SmartSet-300 Touch Screen Moulder Control System – 1,000Set Memory – Maintain all history files, downloads info to the machine and control, triple electronic position readouts for each axis, precision sets, troubleshooting, etc. also including Quick Open Reset.   
    • Precision Auto Straight &/or Profile Jointers
    • Tilting Chip Breakers, Pressure Plates and/or Feed Beam
    • Angling Side Head Spindle(s)
    • Grooved Beds for very short stock Feeding
    • Universal Head or Rip Attachment is optional
    • Remote Hand held Pendant control

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  9. Morbidelli 5" x 18" p200 CNC Router with HE-POD Technology

    Morbidelli p200 CNC Router with HE-POD Technology

    Contact Us For Price

    Morbidelli p200 CNC Router with HE-POD Technology

    This CNC Router, manufactured by Morbidelli, a division of SCM, is a universal machining center, featuring a 3-D work table with HePods for routing, edgebanding and drilling.

    Working area

    • Working area along X axis 5510 mm 217”
    • Working area along Y axis 1600 mm 63¾”
    • Panel clearance Y 1900 mm ** 74¾” **
    • Panel clearance Z 180 mm 7”
    • Panle length (with alternated work process) 2600 + 2600 mm *** 102” + 102” ***
    • Vectorial speed X-Y axis “pro-space” 56 m/min 184 ft/min
    • Vectorial speed X-Y axis “pro-speed” 78 m/min 25

    ** maximum width of the panel to be loaded

    *** with horizontal drilling doable, router vertically oriented and no central stops

    For additional information and shipping quotes...

    Contact Stan, at First Choice Industrial
    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

  10. Leadermac Super Thundermac Moulder Series

    Leadermac Super Thundermac Moulder Series - Configured with 4-11 Heads and up to 1000, 1350 or 1500 FPM

    Contact Us For Price

    Leadermac Super Thundermac Moulder Series - Configured with 4-11 Heads and up to 1000, 1350 or 1500 FPM

    The Super Thundermac Moulder Series, manufactured by Leadermac, features a12" width capacity and a 6" or 8" thickness capacity.

    Additonal Features:

    • 2 to 11 Heads & optional Universal Head or Rip Attachment
    • Width Capacity – 12″(305mm)
    • Thickness Capacity – 6″ (150mm) or 8″ (205mm)
    • Feed Speeds to 825 fpm (250mpm) or 1000 fpm (300mpm)

    Technical Specifications:

    • Feed speeds of 825fpm or 1500 fpm – as desired
    • 1 piece, machine main frame is heat treated for max. stability & rigidity. E.g. 10 head machine weighs in excess of 110,000lbs.
    • Feed System is Chainless Full HD Cardan Shaft with extra heavy gearboxes and oversized universals
    • 12″ (300mm) Feed Rolls
    • More Powered Top & Full Width Bottom Rolls then most of our competition
    • Pneumatic pressure of the Top Feed Rolls can be easily set to provide an the best feed roll pressure.
    • Pneumatic Pressure to Side Head Holdover Rolls as well as the Top Head Chipbreaker(s) easily pressure adjusted to each aera
    • Smartset-Advanced Touch Screen Moulder Control System – Maintains all history files, downloads info from the grinding room, including triple electronic position readouts for each axis, precision sets, troubleshooting, etc.
    • Super Precision Spindle Assemblies ea. incl. 4 Super-Precision + outboard Bearings for highest tolerances
    • Spindles Speeds are std. 6,000 rpm and 7,200rpm/or Variable is optional
    • Hydro-Loc Outboards for horizontal spindle support
    • Precision Auto Straight &/or profile jointers as desired
    • Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates & Man Guide for max. wear resistance.
    • Inside the enclosure head hoist
    • Automatic HD Table Lube System included
    • Central lubrication system

    Optional Features:

    • 8″ Thickness – optional
    • Feed Speeds to 820fpm(250mpm) or 1500 fpm
    • Special Configurations available on Request –
    • Precision Auto Straight &/or profile jointers
    • Universal Head or Rip Attachment is optional
    • Rip Saw Attachment to 125HP

    Contact Stan, our moulder specialist with 30+ years moulder service and sales experience.

    Phone 678.642.9722 

    Email sales@firstchoiceind.net Learn More

Items 1 to 10 of 409 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction